Skip to lesson content

Lesson 4 of 10

Amines · Lesson 4 of 10

Physical Properties: Hydrogen Bonding and Solubility

“Explain how amine bonding and molecular size control state, water solubility and boiling points.”

Learning Objectives

• Predict which amines can donate and accept hydrogen bonds. • Explain why lower amines dissolve in water while larger ones dissolve poorly. • Interpret boiling-point differences among comparable primary, secondary and tertiary amines. • Distinguish amine, alcohol and alkane intermolecular forces.

Linking an invisible intermolecular attraction to observable behaviour

Lower aliphatic amines have relatively low molecular masses and can be gases, often with characteristic fishy odours; increasing molecular mass raises dispersion interactions and leads to liquid or solid members. Pure aniline and related arylamines may be nearly colourless when freshly prepared but darken in air because oxidative changes form coloured impurities. These observations concern physical state and stability, not simply whether a molecule contains nitrogen.

Which amines hydrogen-bond with one another?

Nitrogen has a nonbonding electron pair that can accept a hydrogen bond from an N–H or O–H donor. Primary and secondary amines also contain N–H bonds, so identical molecules can donate and accept intermolecular hydrogen bonds. Tertiary amines have no N–H bond and cannot donate N–H hydrogen bonds to one another, although they still accept hydrogen bonds from water or alcohol. Therefore “tertiary amines cannot hydrogen-bond” is too broad and incorrect.

Intermolecular hydrogen bonding between aminesR–NH–N–RHHN···H hydrogen bondAmine nitrogen accepts a hydrogen bond; N–H of another amine donates it.
Intermolecular N–H···N interaction— Dotted line signifies a hydrogen bond, not a covalent N–H bond.

An O–H bond is generally more polar than an N–H bond, and oxygen-containing alcohols often exhibit stronger intermolecular hydrogen bonding than amines of comparable molecular mass. Alkane molecules have neither a suitable lone-pair acceptor nor N–H/O–H donor and rely mainly on dispersion forces. Thus among comparable small molecules the boiling-point tendency is often alcohol > primary amine > similar alkane, with molecular geometry and mass also relevant.

Comparing isomeric amines at the same molecular mass

For similarly shaped isomeric amines, the source reports a primary > secondary > tertiary boiling-point pattern. Primary amines offer two N–H donors per molecule; secondary offer one; tertiary offer none. However, boiling-point order is not a universal ranking across arbitrarily different molecules: branching, dipole moments and dispersion forces can alter results. Compare isomers or explicitly matched molar masses before drawing a strong conclusion.

CompoundMolar mass (g mol⁻¹)Boiling point (K)
Butan-1-amine73350.8
Diethylamine73329.3
N,N-Dimethylethanamine73310.5
2-Methylbutane72300.8
Butan-1-ol74390.3

The table separates several effects. Butan-1-amine and diethylamine have the same formula C₄H₁₁N and almost identical mass, yet the primary amine boils about 21.5 K higher. Tertiary N,N-dimethylethanamine boils lower still. The corresponding alcohol, butan-1-ol, boils about 39.5 K above butan-1-amine, consistent with stronger O–H hydrogen bonding. Matching mass alone does not prove a single molecular mechanism, but it limits a major competing explanation.

Water solubility: attractive N–water bonds compete with hydrophobic carbon

Small amines dissolve in water because amine nitrogen accepts hydrogen bonds from H₂O; primary and secondary amines can donate them too. As the nonpolar alkyl portion becomes larger, water must organise around an increasing hydrophobic surface, so aqueous solubility usually decreases. Higher alkylamines often dissolve only sparingly. A benzene ring likewise contributes a substantial nonpolar portion, so aniline is much less water-soluble than a small aliphatic amine such as ethanamine.

Making an amine salt dramatically changes its interaction with water: CH₃CH₂NH₂ + HCl → [CH₃CH₂NH₃]⁺Cl⁻. The ionic salt is generally more water-compatible than the neutral amine, allowing extraction into aqueous acid and later recovery of neutral amine by basification. This connects solubility to the acid–base chemistry studied next.

Read the comparison rather than memorising it

Problem
Why does butan-1-ol boil higher than butan-1-amine, and why can a tertiary amine still dissolve in water?

  1. 1.Butan-1-ol has a polar O–H bond and forms relatively strong intermolecular O–H···O hydrogen bonds; butan-1-amine has weaker N–H···N association. The oxygen compound thus typically has a higher boiling point under comparable mass conditions.
  2. 2.A tertiary amine has no N–H donor for self-association, but its nitrogen lone pair remains a hydrogen-bond acceptor from water; it therefore can interact with water, especially if its nonpolar carbon group is small.
  3. 3.Water solubility also depends on the size of the hydrophobic portion, so hydrogen-bond capability alone does not determine how much dissolves.

Quick Quiz

Quiz

Quick check

Which amine can accept hydrogen bonds from water but cannot donate an N–H hydrogen bond?

Explanation: Trimethylamine is tertiary: it has a lone pair but no N–H bond.

Quick check

What usually happens to amine water solubility when a long alkyl chain is added?

Explanation: A larger nonpolar portion opposes hydration even while the N lone pair remains available.

Quick check

In the source comparison, which compound has the highest boiling point?

Explanation: Butan-1-ol is 390.3 K, reflecting stronger alcohol association.

Quick check

Among isomeric C₄H₁₁N amines shown, what is the reported trend in boiling point?

Explanation: More N–H donor capacity generally strengthens intermolecular association in this matched group.

Quick check

Which change can help extract an amine into an aqueous acidic layer?

Explanation: Protonation gives an ionic species that is usually much more water-compatible.

Practice Problems

Practice Problems
  1. Calculate the boiling-point difference between butan-1-amine and diethylamine using the table and explain it.
  2. Why is “tertiary amines cannot form hydrogen bonds” an incorrect absolute statement?
  3. Explain why ethanamine dissolves in water more readily than aniline.
  4. Which is expected to boil higher: butan-1-ol or butan-1-amine? Use the reported temperatures.
  5. Describe acid–base extraction of an amine from a neutral organic impurity.

350.8 − 329.3 = 21.5 K. Both are C₄H₁₁N isomers; primary butan-1-amine has two N–H bonds, secondary diethylamine has one. The stronger extent of self hydrogen-bonding helps explain its higher boiling point.

Key Takeaways

Key Takeaways

• Primary and secondary amines have N–H hydrogen-bond donors; all ordinary amines can accept hydrogen bonds through N. • Tertiary amines cannot donate N–H hydrogen bonds to one another but can hydrogen-bond with water as acceptors. • For matched C₄H₁₁N isomers, primary amine boiling point exceeds secondary and tertiary. • The corresponding alcohol typically has stronger intermolecular hydrogen bonding than the amine. • Increasing nonpolar carbon content usually decreases amine solubility in water. • Protonation produces ammonium salts that facilitate aqueous acid–base extraction.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…