Electromagnetic Waves · Lesson 5 of 7
Radio Waves, Microwaves and Infrared
“Connect the long-wavelength spectrum to antennas, radar, heating, thermal imaging and the greenhouse effect.”
• Order the electromagnetic spectrum by wavelength and frequency. • Explain radio and microwave production and detection. • Relate microwave wavelength to radar and energy absorption. • Explain infrared emission, thermal detection and atmospheric absorption.
Different names, the same kind of travelling field
Radio waves, light and X-rays obey the same electromagnetic field theory. The distinguishing scale is frequency or equivalently vacuum wavelength, not a different vacuum speed. In order of increasing frequency the conventional bands are radio, microwave, infrared, visible, ultraviolet, X-ray and gamma. Microwaves are often treated as a subset of radio waves. Boundaries vary between conventions and some names overlap, especially X-rays and gamma rays.
Use vacuum wavelengths when comparing conventional band ranges. Within matter the wavelength changes with speed even though the source frequency remains the same. Thus a visible wave entering glass does not become a different kind of radiation simply because its material wavelength is numerically below a conventional vacuum boundary. Matter distinguishes radiation through its allowed charge and molecular responses; equal propagation speed in vacuum does not mean equal interaction with a wall, atmosphere or detector.
| Band | Illustrative vacuum wavelength range | Main physical link |
|---|---|---|
| Radio, excluding the microwave subset | Longer than about 0.1 m in this convention | Accelerated charges in antennas |
| Microwave | About 0.1 m to 1 mm | Short-wavelength radio; electronic oscillators |
| Infrared | About 1 mm to 700 nm | Thermal emission and molecular processes |
Radio: accelerating charges and a receiving antenna
An alternating voltage makes charges in a transmitting conductor accelerate back and forth. Part of the supplied energy leaves as electromagnetic radiation. At a distant receiving antenna, the electric field drives local charges and produces a small voltage and current that a receiver can process. Source electrons do not travel from the transmitting antenna to the receiving antenna. The receiver extracts information from a time-varying signal rather than consuming a stream of source charges.
Frequency bands are selected for communication applications. As familiar illustrations, medium-wave AM broadcasting uses frequencies of order 10⁶ Hz, while FM broadcasting commonly uses about 88–108 MHz. The letters AM and FM describe ways a signal is varied, not new physical kinds of wave. Television and mobile communication also use radio-frequency radiation. Detailed services and allocations vary, so these examples illustrate the physics rather than a universal frequency plan.
Efficient antenna dimensions are often a substantial fraction of wavelength, such as a half-wave dipole, but antenna design, surrounding materials and loading affect the actual size. This is a useful engineering relationship, not a universal rule equating every emitter’s size to its wavelength. Visible atomic radiation, for instance, can have wavelengths much larger than the emitting atom.
Problem
A receiver tunes from 7.5 MHz to 12 MHz. Find its vacuum wavelength range.
- 1.At 7.5 MHz, λ = 3.0 × 10⁸/(7.5 × 10⁶) = 40 m. At 12 MHz, λ = 25 m.
- 2.The wavelength band is 25–40 m, with the shortest wavelength corresponding to the highest frequency. Writing 40–25 m without noting the reversed correspondence can obscure the inverse relationship.
Microwaves: shorter wavelengths change what equipment can do
Microwaves typically have frequencies of order gigahertz. Magnetrons and klystrons are vacuum-electron devices that can generate microwave radiation; a Gunn diode is a semiconductor device, not a vacuum tube. Microwave detectors can use diodes and receiving antennas. The same electromagnetic fields are involved as in longer radio waves, but the shorter wavelengths make narrow beams possible with suitably sized antennas.
Radar sends a pulse toward a target and receives an echo. The round-trip delay gives distance: a target at range r requires a path of length 2r, so r = cΔt/2 in air to a good approximation. Motion can also be inferred from frequency shifts in suitable radar systems, which underlies speed measurements. The beam and reflected signal do not need a mirror with optical polish; reflection depends on target material and scale compared with wavelength.
Problem
An idealised radar echo returns after 20 μs. Estimate range.
- 1.Convert Δt = 20 × 10⁻⁶ s. The round trip is cΔt = 6000 m, so range is 3000 m.
- 2.Using cΔt as the range would double the result because the wave travels to the target and back.
Microwave heating is not a special resonance of water
An oscillating electric field acts on polar molecules, including water. In liquid water their collective response does not perfectly follow the rapidly changing field; interactions and dielectric loss transfer electromagnetic energy into internal energy. Dissolved ions can also contribute to absorption. A domestic microwave oven commonly operates near 2.45 GHz. It does not select a unique natural resonance of an isolated water molecule. Absorption occurs over a broad frequency range and depends on composition and temperature.
Food can heat nonuniformly because fields, penetration depths and food composition vary. Heat subsequently spreads by ordinary thermal processes. Increasing field intensity can increase power deposited without changing energy per photon. These waves are non-ionising at ordinary microwave frequencies, but non-ionising does not mean incapable of heating. Frequency sets one interaction scale; power, exposure and absorption determine how much energy is deposited.
Infrared: thermal emission and molecular absorption
Matter at ordinary temperatures emits thermal electromagnetic radiation, much of it infrared. Hotter bodies emit more strongly and shift their emission distribution toward shorter wavelengths; sufficiently hot matter also glows visibly. Infrared radiation is therefore not restricted to special heaters. Molecular vibrations and rotations, solid-state processes and suitable electronic devices can emit or absorb infrared. Its conventional range extends from about 700 nm to 1 mm, adjacent to red visible light.
Infrared is often called heat radiation, but heat transfer is not exclusive to infrared: absorbed visible light or microwaves can also increase internal energy. A detector may use a temperature rise, as in a thermopile or bolometer, or a suitable photon-sensitive material. Thermal imagers infer patterns of infrared emission; reflected radiation and surface emissivity affect interpretation. They do not directly photograph a universal “temperature colour.” Infrared LEDs and detectors can also carry remote-control signals without a visible beam.
Earth absorbs some incoming solar radiation and emits longer-wavelength thermal infrared. Gases such as water vapour and carbon dioxide absorb selected infrared bands and emit radiation in multiple directions. This changes how efficiently the surface–atmosphere system loses energy to space. Radiation still escapes through atmospheric windows and from higher layers; “trapping” is a shorthand, not permanent imprisonment of particular photons. Infrared satellite observations also reveal cloud and surface properties, helping environmental and crop monitoring.
Problem
Find frequency for a 10 μm thermal-infrared wave in vacuum.
- 1.Convert 10 μm to 1.0 × 10⁻⁵ m. Then f = c/λ = 3.0 × 10¹³ Hz.
- 2.Its frequency is below visible light, but its vacuum speed is the same. A detector must respond to this spectral range rather than merely be labelled a light detector.
Quick Quiz
Quiz
From radio toward gamma in the spectrum, vacuum wavelength generally
Explanation: At fixed c, higher frequency corresponds to shorter wavelength.
Which microwave generator is a semiconductor device?
Explanation: A Gunn diode is a semiconductor; klystrons and magnetrons are vacuum-electron devices.
A radio wave drives a receiving antenna because
Explanation: Charges already in the receiver respond to the arriving field.
What is the main explanation for microwave heating of liquid water?
Explanation: Polar response and material losses deposit energy; a unique water resonance is not the mechanism.
Why do infrared thermopiles detect radiation?
Explanation: A thermal detector converts absorbed radiant energy into a temperature-dependent signal.
Practice Problems
- A 100 MHz radio transmitter radiates in vacuum. Find wavelength and an approximate half-wave antenna length.
- An ideal radar echo returns after 8.0 μs. Find range and explain the factor of two.
- Compare vacuum wavelengths of a 2.45 GHz oven wave and a 30 GHz radar wave.
- Explain why identifying infrared as “heat waves” can be misleading.
- Explain how the atmosphere can warm the surface while still allowing Earth to lose energy to space.
λ = c/f = 3.0 m. A simple half-wave size estimate is λ/2 = 1.5 m. Actual antenna dimensions require design corrections; this estimate connects wavelength to an engineering scale rather than asserting exact equality.
Key Takeaways
• All electromagnetic bands share vacuum speed c. • Spectrum boundaries are conventional and may overlap. • Radio antennas emit through accelerated charges and receive through local field-driven motion. • Microwaves support radar and material heating. • A microwave oven does not rely on a unique water-molecule resonance. • Infrared is emitted by ordinary warm matter and can be detected thermally. • Greenhouse gases absorb and emit selected infrared bands.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…