Skip to lesson content

Lesson 7 of 7

Electromagnetic Waves · Lesson 7 of 7

Chapter Summary and Practice

“Integrate displacement current, radiation, wave mathematics, energy and spectrum applications with detailed mixed practice.”

Learning Objectives

• Connect displacement current to Maxwell’s prediction of waves. • Select equations together with their geometric and physical conditions. • Solve combined capacitor, wave, energy and photon problems. • Correct misconceptions about field directions, spectrum names and energy.

From a changing capacitor field to light

Begin with charge conservation. A capacitor can store charge even though its ideal gap carries no conduction current. The resulting change of electric flux supplies the displacement-current term missing from the steady-current magnetic circulation law. Adding this term lets different surfaces with the same boundary predict the same magnetic circulation. Faraday’s law provides the complementary connection between changing magnetic flux and electric circulation.

Maxwell’s coupled laws permit travelling electromagnetic fields. An accelerating source can radiate energy; a sinusoidal dipole supplies the same basic frequency to the emitted wave. Hertz’s separate transmitter and detector tested this prediction using radio waves. The propagation does not require a material medium, and already-emitted energy can continue through vacuum after the original source changes.

Choose the model before choosing the equation

SituationAppropriate relationshipCondition or limitation
Full vacuum capacitor gapI_d = ε₀ dΦ_E/dt = dQ/dtFixed ideal geometry; equality refers to full flux
Circular plate interiorB = μ₀Ir/(2πR²)Uniform changing field, r < R; negligible edges
Sinusoidal capacitorI_rms = ωCV_rmsFixed C; peak quantities need √2 conversion
Single travelling vacuum plane waveE₀ = cB₀ and direction E × BNot a universal relation for static or near fields
Material propagationv = 1/√(με)Simple linear homogeneous isotropic lossless model
Photon energyEγ = hf = hc/λ₀λ₀ is vacuum wavelength; total power also needs photon rate

A convenient equation can still be wrong if its assumptions fail. A capacitor’s azimuthal magnetic field is not the same geometry as a plane radiation wave. A field of constant magnitude has no displacement-current contribution unless its flux changes. Equal frequencies do not guarantee equal intensities. A shorter wavelength inside a material does not by itself imply greater photon energy.

Formula reference with physical meaning

Capacitor and changing electric fluxLaTeX
Φ_E: N m²/C; I: A; Q: C; C: F; V: V. The last equality assumes fixed C. Flux uses the same oriented surface as the corresponding circulation law.
Vacuum wave scalesLaTeX
c: m/s; f: Hz; λ₀: m; ω: rad/s; k: rad/m. All bands share c in vacuum, while frequency and wavelength distinguish their scales.
One consistent wave travelling along positive zLaTeX
Fields are in phase and transverse. Because x crossed with y gives z, their signs produce forward energy transport. Reversing both fields leaves the travel direction unchanged.
Energy density referenceLaTeX
All u values are in J/m³. Electric and magnetic contributions are equal for one travelling vacuum plane wave. The total average formula assumes sinusoidal peak E₀.
Photon and intensity referenceLaTeX
Photon energy is in J or eV. I is intensity in W/m², an optional energy-transport extension. Amplitude and photon frequency answer different energy questions.

Recover the derivations through their key steps

For displacement current, E = Q/(ε₀A) gives Φ_E = EA = Q/ε₀. Differentiating gives ε₀ dΦ_E/dt = dQ/dt. For a circular path inside plates, multiply full I by the enclosed area fraction r²/R², then divide μ₀ times that result by circumference 2πr. For the phase speed, differentiate kx − ωt = constant to obtain dx/dt = ω/k. These arguments explain the formulas rather than merely listing them.

For wave energy, substitute B = E/c into B²/(2μ₀), and use 1/(μ₀c²) = ε₀. This gives u_B = u_E point by point. Average sin² over a cycle to get one half; each mean contribution is ε₀E₀²/4. For photon energy, divide hf in joules by 1.602 × 10⁻¹⁹ J/eV. These steps expose the common places for mistakes: missing an area fraction, using f in place of ω, confusing peak and RMS, or losing a factor of two.

One spectrum, different source and detector scales

One continuous electromagnetic spectrumRadioMicrowaveInfraredVisibleUltravioletX-rayGammaIncreasing frequencyIncreasing photon energyDecreasing wavelengthAll travel at c in vacuum.Names have approximate boundaries.
Recall the spectrum order— Ordered bands; box sizes are not proportional to spectral widths.
RegionSource or interaction scaleRepresentative use or detector
Radio and microwaveAccelerating antenna charges; electronic generatorsCommunication, radar; aerials and diodes
InfraredThermal and molecular emission/absorptionThermal imaging, remote controls; bolometers and thermopiles
VisibleElectronic transitions; hot bodiesVision and imaging; eyes and photocells
UltravioletHot sources, discharge lamps; wavelength-selective absorptionDisinfection and controlled processing; UV-sensitive sensors
X-rayElectron deceleration and inner-shell transitionsImaging; film, semiconductor and ionisation detectors
GammaNuclear transitions and radioactive processesControlled therapy; scintillation and ionisation detectors

The ranges are conventional, with overlap. Microwaves are part of the broader radio spectrum. X-ray and gamma naming often uses origin, so energy alone may not identify the name. A window transparent to visible light can still block UVB while admitting some UVA. Microwave heating involves dielectric loss rather than a unique water resonance. Infrared is strongly associated with warm matter but is not the only radiation capable of heating.

A combined worked example

From field amplitude to physical interpretation

Problem
A vacuum wave travels +x with E along y, E₀ = 90 V/m and f = 100 MHz. Find B direction and amplitude, λ and total average energy density.

  1. 1.Direction: y crossed with z gives x, so B is along z when E is positive. B₀ = E₀/c = 3.0 × 10⁻⁷ T.
  2. 2.λ = c/f = 3.0 m. Average density is ε₀E₀²/2 = (8.85 × 10⁻¹²)(8100)/2 = 3.58 × 10⁻⁸ J/m³.
  3. 3.Both fields reverse together, leaving energy direction +x. Doubling E₀ would quadruple this density without changing wavelength or vacuum speed.
Find and correct a model error

Problem
A student uses B = E/c for the fields near a charging capacitor and concludes the capacitor must radiate a plane wave with this field ratio. What is missing?

  1. 1.The E/c relation is restricted to a single travelling vacuum plane-wave solution. A capacitor has source-dependent near fields and geometry that must first be analysed using the circulation law.
  2. 2.A changing electric field supports a magnetic circulation term; it does not by itself establish transverse plane-wave structure, phase and energy flow. The correct first step is to identify the geometry and model.

Quick Quiz

Quiz

Quick check

Which quantity is common to all electromagnetic bands in vacuum?

Explanation: They all propagate at c; the other three quantities vary across the spectrum.

Quick check

A student uses full I in B = μ₀I/(2πr) for r = R/2 inside uniform circular capacitor plates. The field is

Explanation: Only I/4 is enclosed at this radius.

Quick check

In a vacuum plane wave, both E and B reverse. What happens to E × B?

Explanation: Two sign reversals cancel in the cross product.

Quick check

A monochromatic beam’s intensity rises at fixed frequency. What remains unchanged?

Explanation: Frequency fixes each photon’s energy, while total flux can rise.

Quick check

A capacitor’s voltage is V₀ sin ωt with fixed C. Which is its current?

Explanation: Differentiate Q = CV: current is the voltage derivative times C.

Practice Problems

Practice Problems
  1. A circular vacuum capacitor has radius 0.10 m, gap 0.010 m and constant charging current 0.020 A. Estimate capacitance, voltage rate and full-gap displacement current. Explain the plate conservation statement.
  2. An ideal 80 pF capacitor with circular plates R = 0.040 m is connected to 100 V RMS at ω = 500 rad/s. Find I_rms, peak full-gap I_d and peak B at r = 0.020 m.
  3. Compare a 0.10 nm X-ray, 680 nm red light and a 500 m radio wave in vacuum. Find their frequencies and state the common quantity.
  4. A 30 MHz vacuum wave travels +z. Specify allowed field directions and wavelength, then explain why the directions are not individually unique.
  5. A receiver covers 6.0–15 MHz. Find its wavelength band. If a sinusoidal dipole source oscillates at 9.0 MHz, what radiation frequency does the simple model predict?
  6. A harmonic vacuum wave has magnetic amplitude 510 nT. Find electric amplitude, and explain whether the numerical sizes in SI units show unequal energy sharing.
  7. Build vacuum wave equations for travel −x with E₀ = 60 V/m and f = 25 MHz, choosing E along z. State all coefficients and check direction.
  8. Calculate representative photon energies for radio 1 m, microwave 1 cm, infrared 10 μm, visible 500 nm, UV 100 nm, X-ray 0.1 nm and gamma 0.001 nm. Relate their scales to sources.
  9. For f = 2.0 × 10¹⁰ Hz and E₀ = 48 V/m in a travelling vacuum wave, find λ, B₀ and the separate and total average energy densities.
  10. Correct these three claims: microwave ovens use a unique water resonance; ordinary window glass blocks all UV; gamma waves always have shorter wavelengths than all X-rays.

Neglect edges: A = π(0.10)² = 0.03142 m² and C = ε₀A/d = 2.78 × 10⁻¹¹ F = 27.8 pF. Then dV/dt = I/C = 7.19 × 10⁸ V/s. Full-gap I_d = I = 0.020 A. On a plate I_in − I_out = dQ_stored/dt; conduction need not pass across the vacuum. The ordinary zero-accumulation junction form cannot be applied to the storing plate without this term.

Key Takeaways

Key Takeaways

• Displacement current completes the magnetic circulation law for changing electric flux. • The full capacitor-gap current comparison respects charge conservation without conduction through vacuum. • Accelerating sources can radiate energy as coupled electric and magnetic fields. • Travelling vacuum plane waves have transverse, in-phase fields with E₀ = cB₀. • Wave speed, frequency, wavelength and amplitude describe different properties. • Both field-energy contributions are equal in the single travelling vacuum-wave model. • Spectrum names mark approximate ranges and production conventions. • Photon energy follows frequency, while total beam power also depends on photon flux.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…