Skip to lesson content

Lesson 3 of 7

Electromagnetic Waves · Lesson 3 of 7

Describing a Travelling Electromagnetic Wave

“Interpret transverse fields, phase, direction and wave equations; calculate wavelength, frequency and amplitudes.”

Learning Objectives

• Determine propagation direction from electric and magnetic directions. • Read wave number, angular frequency and phase from a sinusoidal field equation. • Construct consistent E and B equations for a vacuum plane wave. • Distinguish speed, frequency, wavelength and field amplitude.

What is transverse when no matter is moving?

In a string wave, the displacement can be perpendicular to travel. In an electromagnetic wave, it is the electric and magnetic field vectors that are perpendicular to travel. At a chosen location a tiny positive test charge would respond to the local E direction; the field arrow is not the trajectory of that charge. A sinusoidal drawing maps field component against position or time, not a literal wavy tube in space.

For one freely travelling plane wave in vacuum, E is perpendicular to B, and both are perpendicular to the propagation direction. Plane means that points in a plane perpendicular to travel share the same phase in the ideal model. A real beam or distant antenna field can often be approximated locally this way; the model is not a claim that every electromagnetic field is a plane wave.

A wave travelling along +xE along +ypropagation +xB along +z: out of pageRight-handed axes: +x right, +y up, +z toward you.E × B points along +x; all three directions are perpendicular.
Electric, magnetic and propagation directions— One instant with positive field components. A dot in a circle denotes an arrow toward the viewer; a cross denotes an arrow away.
Direction and amplitude in vacuumLaTeX
The unit vector n points along travel. E₀ is in V/m and B₀ in T. This vector relation applies to a single travelling vacuum plane wave.

Use the right-handed cyclic rules: +x crossed with +y gives +z; +y crossed with +z gives +x; +z crossed with +x gives +y. Reversing the order reverses the result. For travel along +x and E along +y, B must point along +z, since y crossed with z gives x. Merely choosing either perpendicular direction is not enough: the wrong sign makes the energy travel the other way.

When both fields reverse half a cycle later, their cross product still points forward. The two negative signs cancel. At an instant when E and B are both zero the instantaneous cross product vanishes, but the propagation direction is still specified by the travelling solution. Do not infer a sudden reversal of the wave whenever the signed component E_y changes sign.

Separate repetition in space from repetition in time

Frequency f is the number of complete oscillations per second at one fixed position, measured in hertz. Period T is the time per cycle. Wavelength λ is the distance between neighbouring points in the same phase at one fixed time, such as two adjacent positive crests. Speed v tells how quickly a fixed phase travels. The angular quantities ω and k count phase change in radians rather than complete cycles.

Wave quantities and their unitsLaTeX
T: s; f: Hz; ω: rad/s; k: rad/m; λ: m. Radians are dimensionless, but the labels prevent confusion between cyclic and angular quantities.

A wave moves one wavelength during one period, so v = λ/T = fλ. In vacuum v = c for all electromagnetic frequencies. Doubling f halves λ, provided the medium remains vacuum. Increasing amplitude does not change c. For a plane wave the ratio E₀/B₀ is a speed, not a dimensionless comparison of which field is stronger; their numerical sizes in different SI units cannot be directly compared.

A field equation contains several independent pieces of information

Consistent fields for travel along positive xLaTeX
E_y and B_z are signed components. φ is the initial phase in radians. The shared phase gives simultaneous zeros and extrema; E₀ and B₀ are positive amplitudes.

To determine direction, follow a point of constant phase. For kx − ωt + φ = constant, differentiation gives k dx/dt − ω = 0; hence dx/dt = ω/k > 0 when k and ω are positive. With kx + ωt instead, dx/dt = −ω/k. This direction check is safer than relying on a memorised sign without defining the signs of k and ω. Sinusoidal fields must also satisfy ω/k = c in vacuum.

Field components at one fixed timeE_y / E₀B_z / B₀Matching zeros and maxima: fields are in phase.xx
In-phase spatial profiles— Components are plotted separately with their own normalised axes. Their equal plotted heights do not mean E and B have the same units or magnitudes.

A spatial graph at fixed t shows wavelength between matching crests. A time graph at fixed x shows period between matching crests. Both can look sinusoidal, so read the horizontal axis before interpreting a spacing. A phase shift φ moves both field patterns together. A quarter-cycle shift between E and B would fail the simple travelling-wave relation, even though both graphs would still be sinusoidal.

A local field direction

Problem
A vacuum wave travels along +x. At a particular event E is 6.3 V/m along +y. Find B.

  1. 1.Magnitude B = E/c = 6.3/(3.0 × 10⁸) = 2.1 × 10⁻⁸ T.
  2. 2.The direction is +z, because +y crossed with +z gives +x. The relation uses the instantaneous field values here, not an unstated RMS amplitude.
Reading a plus sign in the phase

Problem
B_y = (2.0 × 10⁻⁷ T) sin(500x + 1.5 × 10¹¹t), with x in m and t in s. Find λ, f and E.

  1. 1.Read k = 500 rad/m and ω = 1.5 × 10¹¹ rad/s. Thus λ = 2π/500 = 0.01257 m, f = ω/(2π) = 2.387 × 10¹⁰ Hz. Check ω/k = 3.0 × 10⁸ m/s.
  2. 2.The plus sign means travel along −x. The electric amplitude is cB₀ = 60 V/m. Choose E_z = (60 V/m) sin(500x + 1.5 × 10¹¹t); +z crossed with +y gives −x.
  3. 3.The same phase does not mean the same coordinate direction: E_z and B_y are different transverse components.

Propagation through a simple material

Ideal transparent-medium approximationLaTeX
Use this for a linear, homogeneous, isotropic, approximately lossless medium at the frequency considered. Real media can absorb waves and have frequency-dependent ε and μ.

At a stationary boundary with a steady monochromatic source, frequency is preserved because the temporal oscillation must match on both sides. The speed and wavelength can change. For glass with n = 1.5, v ≈ 2.0 × 10⁸ m/s and wavelength is two thirds of its vacuum value. The vacuum amplitude formula E₀/B₀ = c must be replaced by the appropriate medium relation; do not use c for a material indiscriminately. The exact SI vacuum speed is 299 792 458 m/s; 3.00 × 10⁸ m/s is the useful rounded value used here.

A changed wavelength

Problem
Light of vacuum wavelength 600 nm enters a transparent medium with n = 1.50. Find f and the new wavelength.

  1. 1.First find f = c/λ₀ = 3.00 × 10⁸/(600 × 10⁻⁹) = 5.00 × 10¹⁴ Hz. This is unchanged at the stationary boundary.
  2. 2.v = c/n = 2.00 × 10⁸ m/s. Hence λ = v/f = 400 nm, shorter than in vacuum. Frequency has not risen simply because wavelength shortened.

Quick Quiz

Quiz

Quick check

Travel is +z and instantaneous E is +x. The corresponding B direction is

Explanation: x crossed with y gives z.

Quick check

With positive k and ω, sin(kx + ωt) travels along

Explanation: Constant phase gives dx/dt = −ω/k.

Quick check

Which spacing on a fixed-position field-versus-time graph gives period?

Explanation: The period is the time to repeat the same phase.

Quick check

In vacuum, doubling frequency while keeping amplitude fixed makes wavelength

Explanation: c = fλ is fixed, so wavelength varies inversely with f.

Quick check

Light enters a stationary transparent medium from vacuum. Which quantity remains fixed?

Explanation: The source sets the temporal frequency at a stationary interface.

Practice Problems

Practice Problems
  1. Construct fields travelling along +z with E₀ = 120 V/m and f = 50.0 MHz, taking E along x and phase zero.
  2. For E_y = 30 cos(20x − 6.0 × 10⁹t) V/m in vacuum, find λ, f and B_z.
  3. A wave travels toward −y. At an event E points +z. Which direction must B have, and why?
  4. A 30 MHz vacuum wave is measured by a stationary detector. Find λ and T; explain why λ and T are different kinds of quantities.
  5. A 750 nm vacuum wave enters a medium with ε = 4ε₀ and μ = μ₀. Find v, f and medium wavelength under the lossless approximation.

In vacuum, B₀ = E₀/c = 4.00 × 10⁻⁷ T, ω = 2πf = 3.142 × 10⁸ rad/s, λ = c/f = 6.00 m and k = 2π/λ = 1.047 rad/m. Use E_x = 120 sin(1.047z − 3.142 × 10⁸t) V/m and B_y = (4.00 × 10⁻⁷) sin(1.047z − 3.142 × 10⁸t) T. Their cross product points +z.

Key Takeaways

Key Takeaways

• A single vacuum plane wave has mutually perpendicular E, B and propagation directions. • E crossed with B points along propagation. • Both fields oscillate in phase for this travelling-wave model. • The amplitude relation is E₀ = cB₀ in vacuum. • Frequency is temporal repetition; wavelength is spatial repetition. • For positive k and ω, kx − ωt travels +x and kx + ωt travels −x. • A stationary material boundary preserves frequency while speed and wavelength may change.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…