Electrochemistry · NCERT Solved Problems
Exercise 2
Exercise 2
18 problems
- Arrange the following metals in the order in which they displace each other from the solution of their salts. Al, Cu, Fe, Mg and Zn.
- Given the standard electrode potentials, K+/K = –2.93V, Ag+/Ag = 0.80V, Hg2+/Hg = 0.79V Mg2+/Mg = –2.37 V, Cr3+/Cr = – 0.74V Arrange these metals in their increasing order of reducing power.
- Depict the galvanic cell in which the reaction Zn(s)+2Ag+(aq) →Zn2+(aq)+2Ag(s) takes place. Further show: (i) Which of the electrode is negatively charged? (ii) The carriers of the current in the cell. (iii) Individual reaction at each electrode.
- Calculate the standard cell potentials of galvanic cell in which the following reactions take place: (i) 2Cr(s) + 3Cd2+(aq) → 2Cr3+(aq) + 3Cd (ii) Fe (aq) + Ag (aq) → Fe3+(aq) + Ag(s) 2+ + Calculate the DrG o and equilibrium constant of the reactions.
- Write the Nernst equation and emf of the following cells at 298 K: (i) Mg(s)|Mg2+(0.001M)||Cu2+(0.0001 M)|Cu(s) (ii) Fe(s)|Fe2+(0.001M)||H+(1M)|H2(g)(1bar)| Pt(s) (iii) Sn(s)|Sn2+(0.050 M)||H+(0.020 M)|H2(g) (1 bar)|Pt(s) (iv) Pt(s)|Br–(0.010 M)|Br2(l )||H+(0.030 M)| H2(g) (1 bar)|Pt(s).
- In the button cells widely used in watches and other devices the following reaction takes place: Zn(s) + Ag2O(s) + H2O(l ) → Zn2+(aq) + 2Ag(s) + 2OH–(aq) Determine Dr Go and E o for the reaction.
- Define conductivity and molar conductivity for the solution of an electrolyte. Discuss their variation with concentration.
- The conductivity of 0.20 M solution of KCl at 298 K is 0.0248 S cm–1. Calculate its molar conductivity.
- The resistance of a conductivity cell containing 0.001M KCl solution at 298 K is 1500 W. What is the cell constant if conductivity of 0.001M KCl solution at 298 K is 0.146 × 10–3 S cm–1.
- The conductivity of sodium chloride at 298 K has been determined at different concentrations and the results are given below: Concentration/M 0.001 0.010 0.020 0.050 0.100 2 –1 10 × k/S m 1.237 11.85 23.15 55.53 106.74 Calculate Λm for all concentrations and draw a plot between Λm and c½. Find the value of Λ0m .
- Conductivity of 0.00241 M acetic acid is 7.896 × 10–5 S cm–1. Calculate its molar conductivity. If Λ0m for acetic acid is 390.5 S cm2 mol–1, what is its dissociation constant?
- How much charge is required for the following reductions: (i) 1 mol of Al3+ to Al ? (ii) 1 mol of Cu2+ to Cu ? (iii) 1 mol of MnO4– to Mn2+ ?
- How much electricity in terms of Faraday is required to produce (i) 20.0 g of Ca from molten CaCl2? (ii) 40.0 g of Al from molten Al2O3?
- How much electricity is required in coulomb for the oxidation of (i) 1 mol of H2O to O2? (ii) 1 mol of FeO to Fe2O3?
- A solution of Ni(NO3)2 is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?
- Three electrolytic cells A,B,C containing solutions of ZnSO4, AgNO3 and CuSO4, respectively are connected in series. A steady current of 1.5 amperes was passed through them until 1.45 g of silver deposited at the cathode of cell B. How long did the current flow? What mass of copper and zinc were deposited?
- Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: (i) Fe3+(aq) and I–(aq) (ii) Ag+ (aq) and Cu(s) (iii) Fe3+ (aq) and Br– (aq) (iv) Ag(s) and Fe 3+ (aq) (v) Br 2 (aq) and Fe2+ (aq).
- Predict the products of electrolysis in each of the following: (i) An aqueous solution of AgNO3 with silver electrodes. (ii) An aqueous solution of AgNO3 with platinum electrodes. (iii) A dilute solution of H2SO4 with platinum electrodes. (iv) An aqueous solution of CuCl2 with platinum electrodes.